* Optical Fiber Cutting
* Covered Wire Stripping Clamp
* Length Fixed Instrument
* Wire Stripper

Note: Following Steps must ensure the cleanliness of product and fiber.

1. Remove the Parts and arrange them in neal row.
2. Penetrate the screw cap through the covered wire cable.
3. Stripe the covered wire, stripped length 50mm.
4. Stripe fiber coating , keep 21mm.
5. Cut out the excess fiber.
6. Fiber length after cut out.
7. Penetrate the fiber, let it a bit bending.
8. Keep fiber bending, and lock the lock catch.
9. Put down tail clip, tighten screw cap, and install the housing.

1. Remove the housing ,pull down lock catch.
2. Pull down screw cap, pull out the covered wire, and re-assembly.