Fiber Optic Fast Connector

Optic Fast Connector Description                                                         

Optical Fiber Fast Connector/OpticalFiber Mechanical Connector, Insertion Loss≤0.3dB, Return Loss≥50dB,SC/UPC TypeConnector, suitable for FTTH drop cable.

Optic Fast Connector Analysis Specification                                        

Optic Fast Connector Operating Steps:                                                

Note:following steps must ensure the cleanliness of product and fiber.

1. Remove theparts and arrange them innoal row.
2. Penetrate the screw cap through the covered wire cable
3. Striped the covered wire,stripped length 50mm
4. Strip fiber coating,keep 21mm
5. Cut out the excess fiber
6. Fiber length after cut out::21mm
7. Penetrate the fiber,let it a bit bending.
8. Keep fiber bending,and lock the lock catch.
9. Put down tail clip,tighten srew cap,and install the housing

Optic Fast Connector Re-open:                                                              

  1.Remove the housing,pull down lock catch

  2.Pull down screw cap.pull out the covered wire,and re-assembly.

If any problem during assembly process,please contact us!

Optic Fast Connector Picture: